- Insert the power plug into a socket and insert the AC adaptor into the Ultrasonic Jewellery Cleaner.
- Open the cover and carefully place the jewellery inside the chamber.
- Gently fill the chamber with lukewarm water (from a cup, not directly from the tap) up to the limit standard line (labelled MAX). *If deep cleaning is required, add a small amount of mild, unscented soap. Avoid any harsh chemicals such as dishwashing liquid, chlorine, bleach, or other household cleaners.
- Press the power switch to start. The Ultrasonic Jewellery Cleaner will begin and will automatically shut down after 3 minutes. *The indicator light will appear blue when it is cleaning and red when it is off.
- Once the cleaning cycle has finished, remove the jewellery and gently pat dry with a soft cloth or tissue. We recommend gently buffing each jewellery piece with a SARAH & SEBASTIAN polishing cloth to finish. Start with the treated inner polishing cloth to remove tarnish and discolouration, and finish with the outer cloth to polish and preserve the brilliance of your SARAH & SEBASTIAN fine jewellery.
- Make sure to drain the cleaning water after each use, and pat dry with a soft cloth before packing the Ultrasonic Jewellery Cleaner away. If detergent is used, ensure the chamber has been properly rinsed before drying, and no residue is left.